Home » Content Hub » Blog »

There are usually about 99 different problems on a job site, but pulling the cable off one of the many wire dispensers Rack-A-Tiers has to offer certainly ain’t one. 

Whether you are pulling multiple small single conductors, lumex, bx, or even large multi conductor teck, Rack-A-Tiers has the wire dispenser rack for you. 

 First on the list, the wire spool rack that started it all, and probably the number 1 cable reel stands for all areas in the electrical industry. They’re great on residential, commercial and industrial sites (especially service calls) 

Rack-A-Tiers Wire Dispenser

The Rack-A-Tiers Wire Dispenser is first on the list, and is probably being used in the field even as you are reading this. This tool is versatile, waterproof, rustproof, rugged, and very reliable. It even locks together to make a comfortable seat! It can hold multiple reels up to 34 inches at the same time and is rated for 330 lbs! Tough to find any cons about this product. The only con is if you’re having to pick up and move multiple reels to pull at multiple locations, you have to pick up and carry the setup. This brings me to number 2 on the list 

E-Z roll wire reel rack 

This product is a “reel” back saver as it comes with wheels! 

This wire spool holder is amazing for large new construction job sites and Reno’s. Slide multiple reels onto a piece of 1-inch pipe, or even your pipe bender, slide on your E-Z roll wire rack onto each and you’re done! 

The wheels allow you to easily move from location to location without having to break your back or Disassemble and reassemble every time. It can hold up to 150 lbs and up to 18″ reels. The E-Z roll wire rack is an amazing time and body saver, and rightfully earns its place at number 2 on the list. 

Cons

Holds slightly smaller reels than the Rack-A-Tiers wire dispenser, with less weight. With the exception of the Big E-Z wire rack 

The Big E-Z utilizes the same design and great features as the original E-Z Roll while allowing you to dispense larger wire spools. With a 300 lbs rating as well as being able to hold reels up to 32″, you really can’t go wrong with either. 

Were not done talking about the E-Z wire rack dispenser just yet. Increase the number of reels you can pull, as well as an increase in with capacity with the E-Z roll multi attachment! This third pair of legs is a great addition to the E-Z roll family. 

Wire Spool Hand Cart

Next up for reel jacks is the Wire Spool Hand Cart. With the ability to hold up to 8 5-inch reels, or 4 6-8 inch reels, this makes pulling x-link and other small single conductors a breeze. The unique shape makes it great for picking up and transporting. Rated for 80lbs, you should have no trouble wiring PLC’s or feeding through conduits. 

Cable dispenser

This next product is a one-of-a-kind cable dispenser. If you rough in houses and commercial buildings, this is an additional must-have tool. The stick is a single rod with a uniquely bent end that can attach to any standard stud. Works great in new construction, renovations, and my favorite, attics and crawlspaces. As I wouldn’t recommend setting up a normal reel dispenser on the drywall ceiling while in an attic, the stick is the best way for pulling cable in tight locations. 

Wire Tub

Oh, you don’t like using reels of wire? Well, Rack-A-Tiers STILL has you covered. 

Third on the list is the Wire Tub. Which allows you to pull coils of wire rather than reels. The Wire Tub allows you to easily dispense and rewind wire. Don’t waste a single foot of wire — rewind it in the Wire Tub and get ready for installation! The large diameter of 24″ allows you to pull large cable coils easily. 

Definitely, the best in class product when it comes to coil pulling tools. 

Caddy Mac 

If you’re pulling multiple hots, neutrals, grounds, and switch legs all at the same time, the Caddy Mac is the reel dispenser for you. The Caddy Mac #1 can hold up to 8 reels of wire! The wire is dispensed while lying flat. 1/2″ solid spindles are attached to the cart, with no loose pieces. Spindles lock in place, even during transportation. Spindles swing out to set position for convenient loading of wire spools. It doubles as a dolly and has wheels for easy transport, folds flat for easy storage, and is rated for 200 lbs! The Caddy Mac is one of the best multi circuit wire dispensers on the market. 

Caddy Mac #2

Now, of course, the Caddy Mac has a bigger and meaner brother, The Caddy Mac #2. 

The Caddy Mac #2 has all the same features as the Caddy Mac, but can hold between 16 and 24 reels of cable and is rated to hold 400lbs! Now that’s ALOT of circuits that can be pulled in one go. 

Reel Mac

Multiple small conductor circuits not in your scope of work? 

Well, Rack-A-Tiers STILL has you covered yet again! First on the list for big boy wire spool stands is the Reel Mac’s. 

With the ability to hold reels up to 96″ in diameter and 2500 lbs of weight! Use them in industrial and commercial settings for all your big teck cables, high voltage, large control or CAT6 cables. Even smaller reels have no problem sitting on top of these beauty’s. These are ideal for almost any sized reel and work incredibly well with pulling cable for outdoor underground work such as dip services. With adjustable heights, these reels will tackle any type of terrain and make a potentially crappy job, a little less crappy. 

Caddy Spool

Rolling large reels all over the job site getting you down? The Caddy Spool literally carries the burden for you! Similar to the Caddy Mac, it has wheels on the back similar to a dolly. Allowing you to roll around site in style and comfort. It’s able to hold reels up to 40″ and 350lbs. Making this a must have tool for big reels at multiple location-type jobs. 

Tug Wise

Have you ever heard of a wire dispenser rack that doesn’t require the use of an Axel? Well last on the list is the Tug Wise. One of the most unique wire dispensers Rack-A-Tiers has to offer. This lazy Susan inspired is one of the most easily stored and convenient products on this list.  All you need to do is screw it to the base of your reel, flip the tee over, and start pulling! This is a great product for industrial and commercial applications as it works best on a flat service. (Life hack alert: attach it to your reel before loading it into your truck, and pull it straight from the box of your pickup!) no loading or unloading massive reels! 

The standard model supports up to 1000 lbs and the deluxe will hold up to 2000 lbs. 

 

I’ve only listed a few, but as you can tell, Rack-A-Tiers has TONS of options when it comes to electrical wire spool holders. They all serve a purpose depending on what you’re doing that day. I recommend picking up a couple of the cable dispensers Rack-A-Tiers has to offer. Whether you’re in an attic, a mill, a grocery store, a school, or in the sun, they offer a product that makes your life a whole lot easier. 

 

Recent Posts