Run Lines Through Crawl Spaces-The Pull Line Installation Gun: Laserline

Give an American the time to create something clever, and odds are it will be some mechanical equipment capable of firing some sort of projectile. For a nation founded on the right to bear arms, it’s no surprise when someone uses the notion of high-powered projectiles in a more creative manner to make life easier. For electricians looking to add a little fun and relieve a little hard labor from running wires, the Laserline Kit is just the tool you need.

Inject a little fun into your day and eliminate wasted time with the Laserline Kit. Capable of firing a foam dart up to 200ft with precision, the Laserline is the ultimate tool for installing wire over T-bar ceilings and other hard-to-reach spaces.

Hit the Mark

The Laserline is a CO2 powered gun that shoots a foam dart up to 200ft with incredible accuracy. The foam dart can be attached to a guide line that you can then use as a guideline to run wires through T-bar ceiling areas, under crawl spaces, and through any other long, tight space you’d rather not spend hours running line in.

Each Laserline Kit includes a gun, 2 CO2 cartridges, 2 foam darts, and 2 spools of line that have a total of 2400 feet of line, 1200 feet to each spool. The Laserline isn’t something you’d find incredibly useful at the average home electrical job, but for those commercial electricians tired of tackling large-scale projects the hard way, the Laserline is a must-have product.

How it Works

The concept is simple really. Think about all those Hollywood feature films where a group of thieves cross the roofs of buildings by firing a guideline from one rooftop to another, and then zip-lining across. The concept is the same here, except it is used for far less nefarious purposes. Rather than waste time running line manually over each T-bar in the ceiling structure, moving your ladder after each bar and tossing line over the next, the Laserline lets you do the job in half time.

Simply line up your shot and fire the foam dart, with guideline attached, up to 200ft over the T-bars. You can then move your ladder just once over to the other side, and pull your wires through in one fell swoop from the other side. Forget constantly climbing up and down your ladder, threading wire over each individual section. Fire once, walk over and pull it through. It’s that simple!

The Laserline kit isn’t just for commercial electrical installation where T-bar ceilings are involved. Maybe you have hard-to-move objects in the way of your wires or you are dealing with a crawl space. Rather than squeeze through an uncomfortable crawl space one or more times, you can fire the Laserline dart through and simply walk to the other side to pull out your wires. Just one trip is all it takes.

Benefits of a Laserline Kit

The most obvious benefit is spelled out above; you’ll save plenty of time with the Laserline Kit. Instead of doing all that walking back and forth, moving ladders, and climbing up and down, you can do it all in one trip instead. You’ll get wires run faster and save time on the overall install projects.

More importantly though, you’ll be safer on the job site with this Laserline Kit. Because you don’t have to climb up and down ladders multiple times and reach to run line over T-bar sections of ceiling, you won’t be exposed to nearly the same slip and fall risk. The same can be said of squeezing into crawl spaces, where any number of issues could threaten your health.

Buy Your Laserline Kit Now

Quit spending the whole day running lines, and stop running up and down ladders. Get your Laserline Kit today from Rack-a-Tiers and shorten the length of any install job. If you’ve already got your Laserline and need more supplies, replacement line and darts are also available for purchase!