Nicole Panton’s Essential Rack-A-Tiers Electrical Tools!
USE CODE “nicolepanton10” to get 10% off your next Rack-A-Tiers order!
It’s time for another talk with one of our favorite electricians, Nicole Panton (follow her Instagram here: @n.x.panton). We went over some of her top Rack-A-Tiers tools that are essential for every electrician. Read on to find a new tool that will change how you work – and make sure to use the coupon code for 10% off your order!
Exploding Garbage Can
Rack-A-Tiers: I saw you posted a few videos about and enjoyed the Exploding Garbage Can.
Nicole: You guys sent it to me, and it wasn’t something that I asked for, but I fell in love with it, and I use it every day. My co-workers are kind of jealous of it too. I love that it’s very durable. I can carry it with me anywhere and I love that it’s reusable which is big because it helps the environment. We usually go through a lot of garbage bags. But yeah, I really enjoyed it.
Rack-A-Tiers: I appreciate the video you made on it. It seems like you really put it to the test.
Nicole: Yeah, I work with BX and steel studs. So, there’s a lot of sharp objects going in there. And this whole time, it still hasn’t gotten any rips.
Reduce Waste with Exploding Garbage Can
E-Z Roll – Wire Dispenser on Wheels
Rack-A-Tiers: So, I guess the second one we can talk about is the E-Z Roll which was in one of the first of your videos we found.
Nicole: I think that’s just an electrician’s essential. I think every site has them and if they don’t, they should get them. They’re so easy to take with you and make pulling wire much easier. All you need is a pipe and electricians typically have pipes lying around. I just love it. I don’t know any electricians that don’t have one. It’s so easy and light, just lift it and roll it around.
Rack-A-Tiers: Did we send you the bigger version, the Big E-Z? Or the E-Z Roll Multi?
Nicole: I’ve used the Multi. I haven’t made a video on it yet. I also have the classic Rack-A-Tiers and I’m planning to make a video on that.
Rack-A-Tiers: A pretty classic tool.
Nicole: Yeah, I like the way the E-Z Roll has wheels even more though.
Head Light – Rechargeable USB Headlight
Rack-A-Tiers: So I always see you wearing the headlight in your posts.
Nicole: That’s probably the item I have in most of my videos. All I do is charge it at night and it lasts me all day if I use the lowest setting. I have dropped it countless times and the front cover is completely gone now but it still works even after all that.
Rack-A-Tiers: Oh, amazing. Good to hear it has lasted.
Nicole: Yeah, I’ve noticed my friends have other ones and they dim over time or don’t last as long. So, I’ve really been impressed with this one.
Check Out the Rack-A-Tiers Head Light
Magnetizer / Demagnetizer
Rack-A-Tiers: A tool that a lot of people might not know about but comes in handy is the Magnetizer/Demagnetizer. Have you been making good use of it?
Nicole: It’s not one I use as often but I definitely keep it in my bag and have it on hand at all times. Sometimes I’m doing meter stacks or panels that are deep, and I have to get to the back and it’s like, if I drop this screw, I’m screwed. I’ve really enjoyed having the magnetizer for that. My friends didn’t even know about it. They thought it was really cool as well.
Get the Magnetzier/Demagnetizer
Double-Ended Impact Bit
One of our top-selling bits, the double-ended impact bit is one you’ll want to keep in your tool belt. A good bit might seem simple but it can make your work much more efficient. Here’s what Nicole had to say about our bits:
Nicole: My number one favorite Rack-A-Tiers item is the Double-Ended Impact Bit. Specifically, the Phillips and Robbie four-inch is the one that I use almost every day. Especially when working with steel studs it’s my go-to. I would definitely recommend that one.
They’ve been great. Like I said, they’re my number one. I’ve had no problems so far and I’ve really done a number on them.
See the Double-Ended Impact Bit
Tape Measure Clip
Another newcomer to the Rack-A-Tiers lineup, the Tape Measure Clip makes sure your tape measure is always where you need it.
Nicole: I wear the Tape Measure Clip every single day. I have two on my pant belt and they’re also large enough to go over my tool belt. And I love that it’s so convenient and they hold like my measuring tape, my extra pouches, and my drill. So that’s also a go-to for me.
Croc’s Needle Nose Wire Strippers
Rack-A-Tiers: How have you been liking the Croc’s Wire strippers?
Nicole: I use those every day as well. They’ve been especially good for fire alarms. I really enjoy them.
More about the Croc’s Needle Nose Wire Strippers:
Crocs are the most versatile and comfortable electrical wire strippers you will ever use. The ergonomic handles are shaped to perfectly fit in your hand while you strip or crimp wire, saving your hands and wrists from soreness. Effortlessly strip standard AWG #10 – #22 wire and strip the outer jacket of 14/2 and 12/2 NMD using razor-sharp wire stripping blades.
Check Out the Croc's Wire Strippers
Rack-A-Tiers T-Shirt and Hoodie
Rack-A-Tiers: I know you also got one of the T-shirts. I’m wearing one now and it’s so comfortable.
Nicole: I made a video about the t-shirt, and you’re right. I also have the hoodie as well. I really like the hoodie.
Rack-A-Tiers: You take it traveling with you, right?
Nicole: Yeah, it’s a great travel hoodie.
Rack-A-Tiers: Well, thank you so much, Nicole. I appreciate you taking some time out of your day after a hard long day at work. Very much appreciated.
Browse Our Electrician Apparel
Essential Tools for Electricians
Level up your workflow with these top electrical tools by Rack-A-Tiers. And make sure you check out Nicole on Instagram and TikTok for some amazing videos. Everything from tool reviews to hilarious skits. Here’s where you can find Nicole: